Telycam - C2 - TLC-700-IP-30-4K - Techspecs

TECH SPECS


Item Vision+ 4KN (30X) / TLC-700-IP-30-4K(NDI)-AB
Video Format • HDMI2.0：3840*2160 P60/50/30/25/29.97/24/23.98; 1920*1080P60/50/30/25/59.94/29.97/24/23.98; 1920*1080I60/50/59.94; 1280*720P60/50/30/25/59.94/29.97
• Main Stream：3840*2160P15~60；1920*1080P15~60；1280*720P15~601024*576P15~60 Sub Stream： 640*360P15~30
• 3G-SDI：1920*1080P60/50/30/25/59.94/29.97/24/23.98; 1920*1080I60/50/59.94; 1280*720P60/50/30/25/59.94/29.97
• USB2.0(Bulk)： NV12 :1024*576P24;800*480P30; YUYV:1024*576P18;800*480P27; MJPG:3840*2160P30/25; 1920*1080P60/50/30/25; 1280*720P60/50; 1024*276P60/50; 800*480P60/50 H264:3840*2160P60/50/30/25; 1920*1080P60/50/30/25; 1280*720P60/50; 1024*576P60/50; 800*480P60/50/30
Video Interface HDMI2.0，3G-SDI，IP(NDI)，USB2.0
Audio Interface Dual 3.5mm linear inputs
Sensor Sony 1/1.8-inch high quality, 12 MP UHD CMOS senso
Lens 6.91～214.64mm，F1.35 – 4.6，Viewing angle: 59° (Wide) – 1.98° (Tele)
Pan/Tilt Rotation Range Pan:±170°； Tilt：-30°~+90°， Up-side down supported
Pan/Tilt Rotation Speed Pan：0.1°-80°/s； Tilt：0.1°-60°/s
Preset 10 via remote controller，128 via serial，accuracy：0.1°
Control Port RS232, RS485, NDI ®|HX RJ45 (VISCA over IP)、USB2.0(UVC1.1)
Network port speed 1000M
Encode Standard H.264/H.265
Bitrate Control Variable Bitrate, Constant Bitrate
Video Bitrate 1024kbps~61440kbps
Supported Protocol TCP/IP， NDI ®|HX, HTTP， RTSP，DHCP， RTMP，ONVIF， VISCA over IP(TCP&UDP)， HTML5，VISCA， PELCO P/D
POE+ Supported
Daisy Chain Supported
Min Lux 0. 1lux
White Balance Auto/Manual/Auto Tracking/One Push/Indoor/Outdoor
Exposure Auto/manual/iris priority/brightness priority
Focus/Iris/Shutter Auto/Manual
Gamma /WDR/Backlight compensation Supported
2D/3D noise reduction Supported
Anti-Flicker OFF/50Hz/60Hz
Pan/Tilt Flipping Supported
Power Supply DC12V/POE+(IEEE802.3at)
Color Black/White

 

Speak With A Solutions Expert Product Guide Telycam Products

Poser une question

Si vous souhaitez recevoir des informations, veuillez remplir le formulaire ci-dessous. L'équipe commerciale 3D Storm vous répondra dans les meilleurs délais.
Invalid email address.
Entrez votre pays
Veuillez choisir un département
Entrée non valide
Les champs marqués avec * sont requis.
Invalid input

Request Product Info

If you are interested in more information, please complete the form below.
Entrée non valide
Entrée non valide
Please type your full name.
Please type your full name.
Entrée non valide
Entrée non valide
Invalid email address.
Entrée non valide
Fields marked with * are required.
Invalid input

Imprimer E-mail

Telycam - C3 - TLC-300-IP-10-FNDI

Vision+ FN (10X)

  • 01
  • 02
  • 03
  • 04
  • 05
  • 06
  • 07
  • 08
  • 09

Vision+ FN (10X)

Vision+ FN (10X) (TLC-300-IP-10-FNDI) is integrated with Telycam’s custom NDI® Silicon chip, with latest NDI® 5, to provide impressed high quality image at low bandwidth. A single cable enables power, video, control and Tally. 1080p60, 10x Optical Zoom, NDI®, HDMI, 3G-SDI, USB-C Output


Highlights

1080p60 FHD video resolution

10x Optical Zoom

NDI®, HDMI, 3G-SDI, USB-C video interface, Line in audio interface

NDI® 5 Integrated

Power over Ethernet

 
1080p60 Full HD Resolution
TLC-300-IP-10-FNDI is equipped with the most advanced image processing SoC and 1/2.8-inch 2.4MP image sensor, to achieve smooth, sharp and crystal-clear FHD 1080p60 images, even in low-light working environment.
10x Optical Zoom
Shooting with 10x optical zoom and 4X electronic digital zoom and a 60° horizontal angle of view.
 
 
NDI® 5 Integrated
High bandwidth NDI® transmits full HD video at a maximum of 125 Mbps, enabling high-quality, low-latency live video transmission. With high bandwidth NDI®, TLC-300-IP-20-FNDI performs high image quality and low latency for live video production.
3G-SDI/HDMI/USB2.0 Available
In addition to NDI ®, 3G-SDI, HDMI and USB2.0 output image simultaneously as well. 3G-SDI and HDMI are for conventional video production workflow, and USB output can be used as a high-end webcam.
 
 
Smooth and Quiet PTZ Movement
Perform real-time pan, tilt, and zoom camera movements with motor-driven PTZ camera control and configurable preset positions.
Power over Ethernet
A single cable to realize power, video, control and Tally for the camera.
 
 
Program and Preview Tally
The indicator light can work as Tally when receive tally notification from the NDI® devices, to show the live is on or off.
High Quality Audio
Built in professional level audio in for line in input.
 
 
Intuitive WebUI for Preview and Control
With intuitive WebUI, you can preview the video and operate the control of the camera via it easily. It can be opened in different browsers directly without any plug-in. And the WebUI supports multiple language: English, Chinese, Russian and Korea.
Pain-Free Firmware Upgrade
Firmware is upgraded via WebUI with a single file, following the guideline by successive “click”, then it works.

 

Speak With A Solutions Expert Product Guide Telycam Products

Poser une question

Si vous souhaitez recevoir des informations, veuillez remplir le formulaire ci-dessous. L'équipe commerciale 3D Storm vous répondra dans les meilleurs délais.
Invalid email address.
Entrez votre pays
Veuillez choisir un département
Entrée non valide
Les champs marqués avec * sont requis.
Invalid input

Request Product Info

If you are interested in more information, please complete the form below.
Entrée non valide
Entrée non valide
Please type your full name.
Please type your full name.
Entrée non valide
Entrée non valide
Invalid email address.
Entrée non valide
Fields marked with * are required.
Invalid input

Imprimer E-mail

Telycam - C4 - TLC-300-IP-20-FNDI

Vision+ FN (20X)

  • 01
  • 02
  • 03
  • 04
  • 05
  • 06
  • 07
  • 08
  • 09

Vision+ FN (20X)

Vision+ FN (20X) (TLC-300-IP-20-FNDI) is integrated with Telycam’s custom NDI® Silicon chip, with latest NDI® 5, to provide impressed high quality image at low bandwidth. A single cable enables power, video, control and Tally. 1080p60, 20x Optical Zoom, NDI®, HDMI, 3G-SDI, USB-C Output


Highlights

1080p60 FHD video resolution

20x Optical Zoom

NDI ®, HDMI, 3G-SDI, USB-C video interface, Line in audio interface

NDI® 5 Integrated

Power over Ethernet

 
1080p60 Full HD Resolution
TLC-300-IP-10-FNDI is equipped with the most advanced image processing SoC and 1/2.8-inch 2.4MP image sensor, to achieve smooth, sharp and crystal-clear FHD 1080p60 images, even in low-light working environment.
10x Optical Zoom
Shooting with 10x optical zoom and 4X electronic digital zoom and a 60° horizontal angle of view.
 
 
NDI® 5 Integrated
High bandwidth NDI® transmits full HD video at a maximum of 125 Mbps, enabling high-quality, low-latency live video transmission. With high bandwidth NDI®, TLC-300-IP-20-FNDI performs high image quality and low latency for live video production.
3G-SDI/HDMI/USB2.0 Available
In addition to NDI ®, 3G-SDI, HDMI and USB2.0 output image simultaneously as well. 3G-SDI and HDMI are for conventional video production workflow, and USB output can be used as a high-end webcam.
 
 
Smooth and Quiet PTZ Movement
Perform real-time pan, tilt, and zoom camera movements with motor-driven PTZ camera control and configurable preset positions.
Power over Ethernet
A single cable to realize power, video, control and Tally for the camera.
 
 
Program and Preview Tally
The indicator light can work as Tally when receive tally notification from the NDI® devices, to show the live is on or off.
High Quality Audio
Built in professional level audio in for line in input.
 
 
Intuitive WebUI for Preview and Control
With intuitive WebUI, you can preview the video and operate the control of the camera via it easily. It can be opened in different browsers directly without any plug-in. And the WebUI supports multiple language: English, Chinese, Russian and Korea.
Pain-Free Firmware Upgrade
Firmware is upgraded via WebUI with a single file, following the guideline by successive “click”, then it works.

 

Speak With A Solutions Expert Product Guide Telycam Products

Poser une question

Si vous souhaitez recevoir des informations, veuillez remplir le formulaire ci-dessous. L'équipe commerciale 3D Storm vous répondra dans les meilleurs délais.
Invalid email address.
Entrez votre pays
Veuillez choisir un département
Entrée non valide
Les champs marqués avec * sont requis.
Invalid input

Request Product Info

If you are interested in more information, please complete the form below.
Entrée non valide
Entrée non valide
Please type your full name.
Please type your full name.
Entrée non valide
Entrée non valide
Invalid email address.
Entrée non valide
Fields marked with * are required.
Invalid input

Imprimer E-mail

Telycam - C1 - TLC-300-IP-12-4K - Techspecs

TECH SPEC


Item Vision+ 4KN (12X) / TLC-300-IP-12-4K(NDI)-AB
Sensor 1/2.8 inch 8.4MP CMOS Sensor
Video Format • HDMI：3840*2160P60/59.94/50/30/29.97/25； 1920*1080P60/59.94/50/30/29.97/25/24/23.98； 1920*1080I60/59.94/50； 1280*720P60/59.94/50/30/29.97/25
• NDI®|HX：Main stream：3840*2160P15~60；1920*1080P15~60；1280*720P15~60；1024*576P15~60 Sub stream：640*360P30
• 3G-SDI：1920*1080P60/59.94/50/30/29.97/25/24/23.98； 1920*1080I60/59.94/50； 1280*720P60/59.94/50/30/29.97/25
• USB Type-： NV12：1920*1080P5；1280*720P15；1024*576P25；800*448P30 YUYV：1920*1080P5；1280*720P15；1024*576P25；800*448P30 MJPG：3840*2160P30；1920*1080P60；1280*720P60；1024*576P60；800*448P60 H264/H265：3840*2160P30；1920*1080P60；1280*720P60；1024*576P60；800*448P60
Zoom 12X Optical Zoom+4X Digital Zoom
Horizontal View Angle 7.6°(Tele)~80.5°(Wide)
Lens Focal length：3.4mm~40.3 mm Iris：F1.8(Wide)~F3.6(Tele)
Shortest Focus Distance Wide：1m Tele：1.5m
Preset Remote controller: 10; Serial port: 128; Accuracy：0.1°
Pan Rotation Angle -170° ~+170°
Tilt Rotation Angle -30° ~+90°
Pan Rotation Speed 0.1°~120°/s
Tilt Rotation Speed 0.1°~80°/s
Control Port RS232(RS485), NDI®|HX, USB Type-C
Video Port NDI®|HX, HDMI, 3G-SDI, USB Type-C
Audio Port 3.5mm Line in
Network Port Speed 1000M
Noise Reduction 2D&3D
Minimum Illumination 0.01 lux
White Balance Auto/Manual/Auto tracking/Push/Indoor/Outdoor/Color Temperature
Exposure Auto/Manual/Shutter Priority/Iris Priority/Brightness Priority
Anti-Flicker OFF,50Hz,60Hz
Image Flip Support
Mirroring Support
Focus Auto/Manual
Iris Auto/Manual
Electronic-shutter Auto/Manual
Gamma Support
Backlight Compensation Support
Tally Support
Video Encoding H.264, H.265
Bitrate Control Variable bitrate(VBR), Constant bitrate(CBR)
Bitrate Range 1024Kbps~61440Kbps
Protocol NDI®|HX, VISCA over IP, VISCA, RTSP, RTMP, HTTP, ONVIF, TCP/UDP, PELCO-P/D
POE+ Support
Daisy Chain Support
Input Voltage DC12V, POE+(IEEE802.3at)
Dimension（L×W×H） 220mm×190mm×173mm
Net Weight 1.5kg(3.3LBS)

 

Speak With A Solutions Expert Telycam Products

Poser une question

Si vous souhaitez recevoir des informations, veuillez remplir le formulaire ci-dessous. L'équipe commerciale 3D Storm vous répondra dans les meilleurs délais.
Invalid email address.
Entrez votre pays
Veuillez choisir un département
Entrée non valide
Les champs marqués avec * sont requis.
Invalid input

Request Product Info

If you are interested in more information, please complete the form below.
Entrée non valide
Entrée non valide
Please type your full name.
Please type your full name.
Entrée non valide
Entrée non valide
Invalid email address.
Entrée non valide
Fields marked with * are required.
Invalid input

Imprimer E-mail

Telycam - TLC-50TC (NDI)

  • 01
  • 02
  • 03
  • 04
  • 05
  • 06

V-Joy+ PTZ Remote

NDI/IP Remote Control Keyboard
V-Joy+ / TLC-50TC(NDI)


Highlights

Be able to control different brands of cameras

Be able to use different protocols to control camera simultaneously: NDI/VISCA over IP/VISCA/ONVIF

Simple and intuitive panel design to enable control and adjust the image simply

Has a wide range of control interfaces: NDI/Ethernet, RS232, RS485, RS422

 
Broad Compatibility
• Supports multiple protocols NDI, VISCA over IP, Serial VISCA, ONVIF, PELCO P/D.
• Users can control multiple cameras with different protocols with one keyboard, or multiple keyboards controlling one camera through a network interface.
• It supports up to 7 cameras of daisy chain control.
Simple and Clear Layout
• A high-definitionscreen to show detailed camera and control status.
• With a four-dimensional joystick controller to make smooth control of the camera’s all-around rotation and zooming.
 
 
Intuitive Control Indication
• The control buttons and function knobs allow to set the camera’s exposure mode, white balance mode, and focus mode, as well as adjusting image parameters according to your preferences and scene applications.
• 128 preset positions can be set, recalled, and cleared via the numerical button area.
• Comes with 7 camera shortcut control buttons, to switch control between multiple cameras.
Various Control Port
• Whether need RS232, RS485, RS422, or even RJ45 control, the TLC-50TC can meet all requirements.
• V-Joy+ / TLC-50TC(NDI) can be connected to all these interfaces simultaneously.
• V-Joy+ / TLC-50TC(NDI) supports POE and supports 10M, 100M, 1000M adaptive network RJ45 connection.

 

Speak With A Solutions Expert Product Guide Telycam Products

Poser une question

Si vous souhaitez recevoir des informations, veuillez remplir le formulaire ci-dessous. L'équipe commerciale 3D Storm vous répondra dans les meilleurs délais.
Invalid email address.
Entrez votre pays
Veuillez choisir un département
Entrée non valide
Les champs marqués avec * sont requis.
Invalid input

Request Product Info

If you are interested in more information, please complete the form below.
Entrée non valide
Entrée non valide
Please type your full name.
Please type your full name.
Entrée non valide
Entrée non valide
Invalid email address.
Entrée non valide
Fields marked with * are required.
Invalid input

Imprimer E-mail

logo

70 avenue de Capeyron - 33160 Saint Médard-en-Jalles - BORDEAUX - FRANCE

Tel. +33 (0)5 57 262 262

OU ACHETER

logo

Trouver un Revendeur

SERVICE DE RAPPEL

logo

Demander un Rappel

Service de Rappel

Please type your full name.
Please type your full name.
Entrée non valide
Entrée non valide
Invalid email address.
Entrée non valide
Les champs marqués avec * sont requis.
Le service de Rappel 3D Storm est ouvert du lundi au vendredi de 9h30-13h00 et de 14h00-17h30 (heure française), sauf jours fériés en France.
Entrée non valide
Invalid input

INFO PRODUIT

logo

Demander Info Produit

Demande Information Produit

Si vous souhaitez recevoir des informations, veuillez compléter le formulaire ci-dessous, et un commercial de 3D Storm vous contactera.
Entrée non valide
Entrée non valide
Please type your full name.
Please type your full name.
Entrée non valide
Entrée non valide
Invalid email address.
Entrée non valide
Les champs marqués avec * sont requis.
Invalid input